Part I Service Scenarios
Installation 26
1.2.6.3 Setting Hospital Information
On the touch screen, tap Setup to access the setup screen.
On the setup screen, choose System > Region, enter the hospital name in Name and click OK.
1.2.6.4 Setting the System Date and Time
See Part I Service Scenarios: 1.2.6.4 Setting the System Date and Time. Access the Region screen and
set the system date and time in System Time.
1.2.6.5 Setting the System Language
1. After the ultrasound system is started, select Setup on the touch screen to access the setup screen.
2. On the setup screen, choose System > Region > LANGUAGE and TIME and select the system
language from the Language drop-down menu.
3. Click OK in the displayed dialog box.
4. Click Save to save the system language setting.
Restart the system as prompted.
1.2.6.6 Setting the Screensaver and Standby Mode
1. After the ultrasound system is started, select Setup on the touch screen to access the setup screen.
To Next Page
Loading...
Need help?
General
