Mindray Passport 8 Quick Reference Guide

P/N: H-046-005847-00 Rev 3.0
26
Passport
®
Quick Reference Guide
PARAMETER COLORS
The Passport 8 or Passport 12 bedside monitor provides the ability to adjust
the parameter’s numeric and waveform (if applicable) color.
To adjust the parameter’s color on the Passport 8 or Passport 12 bedside
monitor:
a. Select Main Menu (quick key)
b. Select Screen Setup>>
c. Select Measurement Color Setup >>
d. Select parameter
e. Select color
f. Select Main Menu (quick key) or to return to the main display
DPM Central Station Interface: Parameter color on the Passport 8 or Passport
12 bedside monitor and DPM Central Station are independent.
Panorama Central Station Interface: Parameter color on the Passport 8 or
Passport 12 bedside monitor, Panorama Central Station, ViewStation, and
WorkStation are independent.
LOAD DEFAULT (PRESET) SETTINGS
The Passport 8 or Passport 12 bedside monitors settings are automatically
restored either when the patient size is adjusted or when Discharge is
performed.
A clinician may restore default settings on patient currently being monitored
on the Passport 8 or Passport 12 bedside monitor by:
a. Select Main Menu (quick key)
b. Select Load Configuration >>
c. Select user defined (preset) configuration from displayed list
d. Select Load
e. Select Yes to confirm and return to the main display

Mindray Passport 8 Specifications

General

Brand	Mindray
Model	Passport 8
Category	Medical Equipment
Language	English