To Next PageTo Next Page
Need help?Do you have a question about the Minebea Intec PR 1626/60 and is the answer not in the manual?
General| Brand | Minebea Intec |
|---|---|
| Model | PR 1626/60 |
| Category | Recording Equipment |
| Language | English |
Please read this manual carefully and completely before using the product.
Explains how operating instructions, lists, and menu items are presented in the manual.
Details signal words (DANGER, WARNING, CAUTION) indicating hazard severity.
Provides contact information for technical assistance and support.
General warnings and advice for safe product operation and maintenance.
Specifies the intended application and requirements for trained personnel.
Procedure for checking consignment for completeness and transport damage.
Covers visual inspection, installation requirements, and expert acceptance.
Guidelines for performing maintenance and repairs on the device.
Presents a schematic diagram of the intrinsically safe interface.
Details mounting options, including screw mounting and rail mounting.
Describes Ex and nonEx connections, terminal assignments, and cable shielding.
Explains potential equalization for conductive system components in explosive areas.
Maintenance must be performed by trained technicians following national laws.
Repairs require inspection at Minebea Intec; contact dealer for malfunctions.
Provides type, order number, and accuracy specifications for the devices.
Details rated voltage, tolerance range, and power consumption.
Defines intrinsically safe terminal contacts for explosive atmospheres.
Specifies voltage, impedance, and current for load cell excitation.
Defines terminal contacts for non-potentially explosive atmospheres.
Details rated operating range, humidity, and storage limits.
States compliance with immunity requirements for industrial environments.
Provides physical dimensions (H, L, B) and weight of the device.
Lists the possible safety markings for the Ex area and certificate numbers.
Informs about the location of documents and manuals on the product CD.
