Instruction Manual Page 1
7. Control Panel
This section gives detailed descriptions of the Sovereign Elite’s
controls and functionality. It is important that this section is read
carefully as it will provide all the information required to set and adjust
these controls. It may be beneficial to refer back to this section in the
future.
Note: Each control has a recommended setting (indicated by a white or
blue dot) called a Quickstart Setting (see section 7.1).
Figure 12 - The Sovereign Elite Control Panel
7.1 Quickstart Operating Instructions
To start detecting as soon as possible, the Sovereign Elite has
provided “Quickstart” settings. These settings, indicated by a white or
blue dot on each control, have been selected by the factory as
suitable positions for immediate detecting. Adjust the Sovereign Elite
controls to these settings and start searching (see section 9, page 28).
Once you are familiar with all of the controls you will gain greater
performance and versatility by setting the controls to suit the needs of
the area being detected.
To Next Page
Loading...
Need help?
General
