Minelab Sovereign Elite User Manual

The Minelab Sovereign ElitePage 12
14. Troubleshooting Guide
Fault Solution
No Sound Check batteries and battery connections.
Check headphones and their connection.
Erratic Noises Check battery charge and battery connections.
Ensure coil connector is tightened firmly.
Reduce the Sensitivity by turning clockwise or
return to the Auto position.
Switch Noise Cancel switch to other Band
Check headphones and their connection.
Check for sand or grit between coil cover and
coil.
No Target Response Ensure the unit is turned On.
Check battery charge and battery connections.
Check coil connection.
Check headphones and their connection.
Check Disc and Notch settings.
In the unfortunate circumstance that the detector needs to be returned to
Minelab for service, please fill out the Minelab Service Repair Form (on
page 40, or a photocopy of the same) and enclose it with the detector.
Please supply as much detail about the fault as possible as this will
assist our service engineers to rectify the problem quickly and efficiently.

Minelab Sovereign Elite Specifications

General

Brand	Minelab
Model	Sovereign Elite
Category	Metal Detector
Language	English