Need help?Do you have a question about the Minelab Sovereign Elite and is the answer not in the manual?
General| Technology | BBS (Broad Band Spectrum) |
|---|---|
| Sensitivity | Adjustable |
| Waterproof | Waterproof coil |
| Audio Output | Yes (headphone jack) |
| Battery Life | Approximately 20 hours |
| Search Modes | All Metal, Discrimination |
| Ground Balance | Automatic |
Instructions for assembling the armrest and upper shaft components of the detector.
Details the process of assembling the lower shaft section and connecting it to the coil bracket.
Guidance on connecting shaft sections and adjusting the detector's overall length.
Steps to securely attach the control box to the detector shaft.
Alternative method for mounting the control box to the rear of the detector shaft.
Instructions for hip or chest mounting the control box for enhanced user comfort.
Procedure for installing the rechargeable NiMH battery pack into the detector.
Procedure for installing optional alkaline batteries as a backup power source.
Explains low battery indicators and how to recharge NiMH battery packs.
Details on using mains and car chargers for the NiMH battery packs.
Provides initial settings for immediate detecting with the Sovereign Elite.
Explains the volume control and how it also functions as the power switch.
Details how to adjust sensitivity for different detecting conditions and environments.
Describes the threshold control for adjusting the background audio level.
Explains the switch to select between discriminate and all metal modes.
Details the discriminate control for ignoring unwanted metal targets.
Explains the notch control for precise discrimination of specific targets.
Details the tone identification switch for target analysis.
Explains the noise cancellation feature for unstable detecting conditions.
Information on speaker and headphone audio output options.
Instructions for installing the optional Digital Target Indication Meter.
Procedure for calibrating the Digital Target Indication Meter.
Instructions for operating the detector in Discriminate mode.
Instructions for operating the detector in All Metals mode.
Techniques for accurately locating a detected target.
Steps for carefully digging and recovering a detected object.
To Next Page