Minelab Sovereign Elite - Tone ID Switch Functionality; Noise Cancel Feature

Instruction Manual Page 9
When using the Notch and Disc controls in combination, most
unwanted objects can be successfully ignored (see Figure 16). Turning
the Notch control to ignore the pull-tab and the Disc control to ignore the
aluminium foil will set up the Sovereign Elite to ignore pull-tabs and
aluminium foil while still detecting most valuable non-ferrous objects (see
figure 17).
Note: Different pull-tabs may require a slight movement of the Notch
setting.
LOW
CONDUCTIVITY
HIGH
C
ONDUCTIVITY
FOIL
IGNORED
ACCEPTED
FERROUS NON-FERROUS
C
ONDUCTIVITY
PULL-TABS HIGH COINS
AND RINGS
C
OPPER, SILVER,
BRASS and LEAD
LOW COINS
AND RINGS
P
0236-C
N
OTCHDISC
Figure 16 - Ignoring targets using the Notch control
H
IGH
C
ONDUCTIVITY
P
0236-D
LOW
CONDUCTIVITY
FOIL
IGNORED
ACCEPTED
FERROUS NON-FERROUS
C
ONDUCTIVITY
PULL-TABS HIGH COINS
AND RINGS
C
OPPER, SILVER,
BRASS and LEAD
LOW COINS
AND RINGS
N
OTCHDISC
Figure 17 - Ignoring targets using the Disc and Notch controls