EasyManua.ls Logo

MINN KOTA Riptide Ulterra - Troubleshooting Guide; Addressing Trim and Stow Failures; Prop Lockout and Error Tones

MINN KOTA Riptide Ulterra
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42 | minnkotamotors.com
©2019 Johnson Outdoors Marine Electronics, Inc.
TROUBLESHOOTING
NOTICE: For all other malfunctions, visit an Authorized Service Center. You can search for an Authorized Service Center in your
area by visiting our Authorized Service page, found online at minnkotamotors.com, or by calling our customer service number at
800-227-6433.
7. Motor fails to trim:
Check main lift belt tension per the Adjustments section.
8. Motor fails to stow or deploy:
Check for obstructions preventing the motor from deploying or stowing.
Ensure that manual tilt knob is engaged. See the Emergency Stow Procedure section for details.
Check charge state of trolling motor batteries. If trolling motor battery icon on remote is flashing, battery charge is too
low for operation.
9. Prop will not turn on:
Ensure batteries are sufficiently charged.
For safety reasons there is a prop lock out region (approx. 15" from mounting base to lower unit centerline). Ensure that the lower
unit is not in this region.

Other manuals for MINN KOTA Riptide Ulterra

Related product manuals