MINN KOTA Riptide Ulterra - Parts Diagram and List; Riptide Ulterra Control Head Parts

minnkotamotors.com | 53
©2019 Johnson Outdoors Marine Electronics, Inc.
PaRTs DIaGRaM & PaRTs lIsT
RIPTIDE ULTERRA - 80/112 LBS THRUST - 24/36 vOLT - 54"/60"/72" SHAFT
The parts diagram and parts list provides Minn Kota® WEEE compliance disassembly instructions. For more information about where
you should dispose of your waste equipment for recycling and recovery and/or your European Union member state requirements, please
contact your dealer or distributor from which your product was purchased. Tools required, but not limited to: flat head screwdriver,
Phillips screwdriver, socket set, pliers, wire cutters.
Control Head Parts Diagram
T
S
44
32
34
42
38
40
24
26
18
16
2
4
6
14
10
36
46
48
22
8
12
30
28
28
20
Q
R
RIPTIDE ULTERRA CONTROL HEAD