65
CUSTOM FUNCTIONRESET TO DEFAULT SETTINGS
The various flash settings may be changed as necessary. The fol-
lowing five items may be changed.
• Wireless channel setting (channels 1~4)
• Flash range units (m/ft)
• Time to auto power off (4 minutes, 15 minutes, 60 minutes, none)
• Time to auto power off when using wireless (60 minutes, none)
• Exposure modes in which manual flash and multiple flash may be
set (M mode only, all modes)
1. Press the select button for 3
seconds.
• The first item (wireless channel set-
ting) is displayed.
2. Press the select button to
select the item, and press the
+ or – button to select the
desired setting.
• Each time the select button is
pressed, the next of the five items
appears on the data panel (see fol-
lowing page).
Continued on next page
64
Most of the flash functions return to
the default settings, as follows, if both
the + button and – button are pressed
and held for three seconds.
Item
Settings
Page
Flash on/off
On (Auto on or on)
15
Flash coverage (zoom)
Auto zoom (85mm)
23
Flash mode (TTL/M/MULTI)
TTL
36
High speed sync (HSS)
On
38
Wireless/remote flash (WL)
Off
40
Ratio control (RATIO)
Off
–
Power level in TTL/M
1/1
58
Power level in multiple flash
1/32
62
Frequency in multiple flash (Hz)
5
60
Repetition in multiple flash (TIMES)
10
61
CUSTOM FUNCTION
To Next Page
Loading...
