Minolta 5600HS (D) - Installing and Checking Batteries; Battery Installation; Battery Status Check

1312
INSTALLING BATTERIES
The 5600HS (D) may be powered by :
• Four AA-size alkaline batteries
• Four AA-size lithium batteries
• Four AA-size rechargeable nickel-metal hydride (Ni-MH) batteries
Always ensure that rechargeable nickel-metal hydride batteries are
charged in the specified charger unit.
1. Open the battery-chamber
door as shown.
2. Insert the batteries according
to the diagram in the battery
chamber.
3. Close the battery-chamber
door.
• The indicators appear on the data
panel. Press the flash on/off button if
it doesn’t appear.
Checking Batteries
The indicator on the data panel blinks when the batteries are
low.
Power is low. The batteries will need
to be replaced soon. Flash recycling
time may be slow.
Insert new batteries. Flash cannot be
used.
• Check the orientation of the batteries if nothing appears when the
flash on/off button is pressed.
BATTERIES