Minolta Dynax 7xi User Manual

1. Remove body cap and rear lens cap as shown.
2. Align the red bead on the lens barrel with the red dot on the camera's
lens mount. Gently insert the lens into the mount and turn the lens
clockwise until it locks in place with a click.
• If no lens is attached to the camera, if the lens is not attached properly,
or if the AZ/MZ switch on an xi-Series lens is set to MZ, "--" will appear in
the body data panel and in the aperture display of the viewfinder data panel
when Eye-Start activates the camera (below).
10
To attach:

Minolta Dynax 7xi Specifications

General

Brand	Minolta
Model	Dynax 7xi
Category	Digital Camera
Language	English