FILM DRIVE
The camera has three film-drive modes. In single-frame advance mode, the
camera makes one exposure and advances the film one frame each time you
press the shutter-release button. In high-speed continuous mode (H), the film
is advanced at approximately 4 frames per second for long as you hold the
shutter-release button down; low-speed continuous mode (L) will provide
up to 2 frames per second. When you operate the camera in either low- or
high-speed continuous and autofocus mode, the focus setting will be
checked and adjusted between each exposure to ensure that moving
subjects remain sharply focused.
To select the film-drive mode:
1. Open the card door.
2. Press the self-timer/drive-mode button until the indicator for the mode
you want appears in the body data panel.
-NEXT PAGE-
74
To Next Page
Loading...
