The camera uses a 6-volt 2CR5 lithium battery which supplies power for
all camera operations. If you are using an xi-Series lens, the camera battery
also supplies power to the lens zoom motor.
Installation
1. With the main switch in the LOCK position, slide the battery cover
release in the direction indicated to open the battery cover.
2. Insert the battery according to the marks on the inside of the chamber
cover.
3. Snap the cover closed.
• Sometimes it helps to wipe the battery terminals with a clean, dry cloth
in order to ensure proper contact.
CAUTION
• Read and follow all warnings and instructions supplied by the battery
manufacturer.
• Do not attempt to disassemble, recharge, or short-circuit the battery.
Do not subject it to high temperatures or fire. The battery may explode
and cause severe burns.
• Keep batteries away from children.
12
To Next Page
Loading...
Need help?
General
