EasyManua.ls Logo

Minolta Dynax 7xi - Page 97

Minolta Dynax 7xi
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TTL Flash Metering: Operates in all flash modes with dedicated flash unit,
x-sync shutter speed automatically set when flash-on signal appears in
viewfinder; in P, A, or S mode, pressing AE-lock button sets slower shutter
speed (down to 30 sec.) to balance flash with ambient lighting
Programmed AE: Aperture and shutter speed set automatically; built-in or
accessory flash fires automatically when neccessary
Shutter-priority AE: Aperture and shutter speed set automatically; flash
will fire when popped-up (built-in flash) or activated (accessory flash)
Aperture-priority AE: Any available aperture usable; flash will fire when
popped-up (built-in flash) or activated (accessory flash)
Manual: Any available shutter speed or aperture usable; flash will fire
when popped-up (built-in flash) or activated (accessory flash)
Exposure Compensation: +/- 4 stops in 1/2-stop increments
Shutter: Electronically-controlled, vertical-traverse, focal-plane type
Automatic speeds: In program and aperture-priority AE modes, stepless
1/8000 to 30 sec. with nearest half-stop displayed
Manual speeds: In shutter priority AE and manual modes,1/8000 to 30 sec.
in 1/2-stop increments plus BULB in manual mode
Expert Autozoom (with xi-Series Autozoom lens):
ASZ: Programmed selection of focal length based on subject distance:
automatically activated Eye-Start
APZ: Programed continuous setting of focal length based on changing
subject position (only with specified CE cards)
Image-size lock: Continuous setting of focal length to maintain image size
Wide-View Mode: Focal length re-set to allow viewing of 150% of actual
image area until shutter release is pressed partway down.
Film-speed Setting: Automatic Setting for DX-coded films; for films
without DX-coding, previous ISO value set; manual setting also possible
Automatic range: ISO 25-5000 in 1/3-stop increments
Manual range: ISO 6-6000 in 1/3-stop increments
Film transport: Automatic with built-in motor drive; auto threading,auto
advance to first frame; single-frame advance or 2-speed continuous
advance at up to 4 frames per second; automatic rewind or manual start
of rewind; frame counter in body data panel
96

Related product manuals