16
4.1.22 Restore Factory Setting
This setting allows you to reset all menu settings to the factory default settings. This
function will not delete any media stored on your memory card.
1. In VIDEO or PHOTO modes, press the MENU button. Select ‘Restore Factory Setting’
by using the UP or DOWN buttons. Press the OK button to enter the ‘Restore Factory
Setting’ submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from OK and Cancel.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button and your camcorder will return to the
main status screen of the current mode.
4.1.23 Firmware Version
This setting displays the current firmware version of your camcorder.
1. In VIDEO or PHOTO modes, press the MENU button. Select ‘Firmware Version’ by
using the UP or DOWN buttons.
2. The menu will display the current firmware version.
To exit the settings menu, press the MENU button and your camcorder will return to the
main status screen of the current mode.
To Next Page
Loading...
