Need help?Do you have a question about the Minolta MNCD53 and is the answer not in the manual?
General| Brand | Minolta |
|---|---|
| Model | MNCD53 |
| Category | Dash Cameras |
| Language | English |
Instructions to access and modify settings specific to VIDEO and PHOTO modes.
Steps to enter and navigate the main setup menu for device-wide configuration.
Procedure to enter license plate or car number for imprinting on recorded media.
Instructions for inserting and removing the MicroSD card properly.
Guidance on powering the device via car adapter or USB cord.
How to power the camcorder on and manually power it off.
Steps to switch between VIDEO, PHOTO, and PLAYBACK modes.
How to cycle through and exit playback files and modes.
Instructions for playing, stopping, fast-forwarding, rewinding, and managing video clips.
Sets the size of the video recording, with 1080FHD as the highest.
Allows setting a maximum duration for each video clip recorded.
Balances lighting in scenes with dark and bright areas.
Determines how light or dark an image will appear during capture.
Automatically records if movement is detected in front of the camera lens.
Enables or disables recording audio on a video clip.
Adds a date and time stamp on a video clip.
Sets sensitivity for automatic recording upon collision.
Sets the delay time for capturing a photo; a timer can also be set.
Sets the size of the photo being captured, with 12M as the highest.
Enables file sequence and determines photo quality level (Fine is highest).
Sets image brilliance and correct white color for captured photos.
Allows setting color cast and image sensor sensitivity.
Controls image brightness and enables digital image stabilization.
Sets displayed image duration after capture and adds date/time stamp.
Allows setting the date and time for display on videos and photos.
Allows adding a license plate or other car identification number.
Sets the delay time for automatically powering off the camcorder.
Automatically records if collision is detected while parked.
Enables/disables button sounds and sets menu interface language.
Sets TV output standard (NTSC/PAL) and display frequency (50Hz/60Hz).
Sets backlight duration and allows formatting the MicroSD card.
Steps for transferring media to a computer via USB.
Instructions for playing media on a TV using an HDMI cable.
How to reset and power cycle the camcorder if it becomes unresponsive.
To Next Page
