Quick Use
Simply insert a MicroSD card into the MicroSD card slot, and insert the auxiliary power adaptor into
the camera’s USB port and your car’s power port. The camcorder will automatically power on and
begin recording. Remove the auxiliary power adaptor to automatically save the recording and power
the camcorder off. To manually stop recording at any time, press the RECORD button.
CAMCORDER OPERATION
Press the POWER button to power the camcorder on. The camcorder will automatically begin
recording video if a MicroSD card is inserted in the card slot. Press the power button for 5 seconds to
manually power off.
To switch between video, photo and playback modes, simply press the MODE button.
MODE icons are displayed in the upper left corner of the screen. Press the RECORD button to begin
recording video. You may press the UP and DOWN button to adjust the digital zoom.
VIDEO Mode PHOTO Mode
To Next Page
Loading...
