13
4.1.3 Exposure
This function adjusts the frame brightness in your video.
1. In VIDEO mode, press and hold the MODE button. Select ‘Exposure’ by using the LEFT
or RIGHT buttons. Press the OK button to enter the ‘Exposure’ submenu.
2. Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from +2.0, +5/3, +4/3, +1.0, +2/3, +1/3, +0.0, -1/3, -2/3, -1.0, -4/3, -5/3,
and -2.0.
3. Press the OK button to confirm your selected setting.
4. To exit the settings menu, press the MODE button twice and your camcorder will return
to the main status screen of the current mode.
4.1.4 Motion Detection
This setting automatically begins recording if movement is detected in front of the
camcorder lens. Once recording, the camcorder will stop recording if not further movement
is detected within a 10-second period of the last movement registered. You may also
manually stop recording anytime by pressing the OK button during a recording.
1. In VIDEO mode, press and hold the MODE button. Select ‘Motion Detection’ by using
the LEFT or RIGHT buttons. Press the OK button to enter the ‘Motion Detection’
submenu.
2. Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
4. To exit the settings menu, press the MODE button twice and your camcorder will return
to the main status screen of the current mode.
Note: When selecting OFF, your camcorder will still automatically record upon startup if you
power it off.
4.1.5 Record Audio
This setting allows you to set the built-in microphone ON or OFF during a video recording.
Once you select an option, your camcorder will either record audio within the video file, or
record a video file without audio captured.
1. In VIDEO mode, press and hold the MODE button. Select ‘Record Audio’ by using the
LEFT or RIGHT buttons. Press the OK button to enter the ‘Record Audio’ submenu.
2. Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
4. To exit the settings menu, press the MODE button twice and your camcorder will return
to the main status screen of the current mode.
To Next Page
Loading...
