6
To disable the IR LED lights, short-press the POWER button again. You will notice
that the IR light indicator on the screen is no longer showing, instead a sun icon will
show.
2. USING YOUR CAMCORDER
Quick Use Instructions
Simply insert the memory card into the card slot, and insert the auxiliary power adaptor into
the camcorder’s USB port and your car’s power port. The camcorder will automatically power
on and begin recording a video file.
To start or stop recording at any time, press the OK button. You may also remove the
auxiliary DC power adaptor at any time to automatically save a recording and power the
camcorder off. Just mount it to your windshield, plug in the power and drive!
To Next Page
Loading...
