16
4.2.9 Quick Review
This setting allows you to re before returning back to Photo
Mode.
1. In PHOTO mode, press the MENU button. Select by using the UP or
DOWN buttons. Press the OK button to enter the submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, 2 Seconds and 5 Seconds.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.10 Self-Timer
This setting enables the camcorder to capture a photo using a preset count down.
1. In PHOTO mode, press the MENU button. Select Self- by using the UP or
DOWN buttons. Press the OK button to enter the Self- submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off, 2s Delay, 5s Delay, and 10s Delay.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
4.2.11 Date & Time Stamp
This setting allows you to imprint a date & time onto your captured photos. Once a photo is
captured with the imprint, the imprint cannot be removed.
1. In PHOTO mode, press the MENU button. Select Date & Time by using the UP
or DOWN buttons. Press the OK button to enter the Date & Time submenu.
2. Press the UP or DOWN buttons again to navigate the submenu and select a setting.
You can select from Off and On.
3. Press the OK button to confirm your selected setting.
To exit the settings menu, press the MENU button twice and your camcorder will return to the
main status screen of the current mode.
To Next Page
Loading...
