49
Controls
1. IRLEDswithablackfilterfornightrecordings
2. Twilightsensor
3. BlueactivationLED
4. Cameralens
5. Lockablelatch
6. Motionsensor
7. Rubberplugforexternalpowersupply
8. 2”LCDcolordisplay
9. Memorycardslot
10.SIMcardslot
11. Controlbuttons,OKbutton
12. Mainswitchwiththreepositions:
Off/SetupMode/OperationalMode
13.Portforexternalpowersupply(6V/9VDC)
14.USBcableport
15.Menubutton
16.Batterycompartmentfor12x1.5VoltAAbatteries
17. Mountingbrackets
18.¼”tripodthread
19. Antenna
Preparing Your Camera
Explanation of the Controls
Proceedasfollowstopreparethecameraforuse:
1.PlaceyourDTC1000onaflatsurface.
2.
Pushthelatch(5)upontherightofthecamerabody.
3.Foldthelatch(5)overtotheright.
4.Openthefrontofthecameratotheleft.
Ontheleftoftheopenedcamerabodyyouwillsee
thecontrols(11,12,15)andontherightthebattery
compartment(16).Ontheleftouteredgeofthecam-
erabodyyoucanfindthememorycardandSIMcard
slots(9/10).Atthetopoftheinnersurfaceisthe2”
LCDdisplay(8).Belowthedisplayyouwillseethe
fourdirectionalbuttonstomakeselectionsinthemenu
(11).InthecenterofthesebuttonsyouwillfindtheOK
button(11)usedtoconfirmtheselectedmenusettings;
theoval-shapedENTERbuttontotheupperright(15)is
toswitchbacktothemainmenuwhileinSetupMode.
Onthebottomleftisthemainswitch(12)withthree
positionsforthefollowingsettings:
1.OFF=mainswitchtotheleft
2.SET=SetupMode;mainswitchinthemiddle
3.ON=OperationalMode;mainswitchtotheright