This manual has been especially prepared for those persons responsible for the SAFE operation and maintenance
of Minster Model 101 OBI/OBS Series power presses. The technical information which it contains has been corre-
lated, where possible, into related sections. Supporting illustrations and charts are also included to provide readers
with quick reference to a given component or activity and to show the association of that component with related
parts. Additionally, illustrations used herein are representative of equipment available at the time of publication.
Throughout the manual, warnings are included as a part of the servicing procedures. If should be noted that some
warnings refer to functions other than those required for direct operation of the press. Warning signs are also mount-
ed at strategic points on the press to remind personnel of hazards that may not be obvious when, and if, improper
procedures are followed. The objective here is to establish SAFE operating procedures for all personnel associat-
ed with POWER PRESSES — and to PREVENT ACCIDENTS.
Make every effort to keep all presses in good working condition and SAFE FOR PRODUCTION. If is imperative that
the press user establish and follow a program of periodic and regular inspections to make certain the press and its
auxiliary equipment are in a safe operating condition. Employers must keep records of those inspections and of the
maintenance work performed.
We wish to acknowledge our indebtedness to the engineers, service personnel, and press users who contributed
many valuable suggestion for the manual. Their cooperation is sincerely appreciated.
A - 3
REGARDING WARRANTY
TERMS OF THE WARRANTY ARE FULLY DOCUMENTED IN THE MINSTER WARRANTY.
A COPY OF THAT WARRANTY IS INCLUDED IN THE COMPOSITE SERVICE
MANUAL; ADDITIONAL COPIES ARE AVAILABLE UPON REQUEST.
PREFACE
To Next Page
Loading...
