Page 31
5.6.2 Cleaning the Recovery Tank
Clean the recovery tank (Fig. 9/1) at daily intervals or as
required.
1. Empty recovery tank, see paragraph 5.6.1.
2. Open the recovery tank lid (Fig. 9/4)
3. Take drain hose from holder (Fig. 9/2) and empty
recovery tank completely.
4. Remove remaining dirt by rinsing with clean water.
5. Rinse drain hose as well.
5.6.3 Clean Suction Filter
Check suction fi lter (Fig. 9/3) for function at daily intervals
and clean if required. The suction fi lter is clipped on and can
be easily removed.
5.6.1 Empty Recovery Tank
Clean recovery tank (Fig. 9/1) at daily intervals, as required
or upon acoustic signal (increased suction motor speed).
1. Take machine to appropriate place for discharge.
2. Park machine such that drain hose reaches a drain
aperture in the fl oor.
3. Switch off machine.
Observe the legal provisions
and the local regulations for
disposal of detergents!
4. Take drain hose (Fig. 9/2) from holder and empty dirty
water tank completely.
To Next Page
Loading...
