Mio SLICE User Guide 12
FIRMWARE UPDATES
Firmware updates provide new features and device improvements. When a new rmware is available for your Mio
SLICE, you will be notied in the Mio PAI app. You will also see the option to update your rmware in the Settings
tab of the PAI app.
Try the following tips if you have trouble updating your Mio SLICE:
1. Fully charge your SLICE.
2. Keep the PAI app open and do not navigate away from the app until the rmware update is complete.
3. Keep your SLICE as close as possible to the phone until the rmware update is complete.
4. Check that your phone has a stable internet connection.
RESETTING MIO SLICE AND
PAIRING TO A NEW PHONE
To connect Mio SLICE to another smartphone, a factory reset is required:
1. Open the PAI app on the original phone. Navigate to the Settings tab and select Forget Device.
2. Open the phone’s Bluetooth settings and forget SLICE from the list of paired devices.
3. Factory reset the SLICE:
Note: Performing a factory reset will erase all data on the SLICE
and require you to recongure the settings.
a. Make sure SLICE has more than 50% battery remaining
b. Place SLICE on the charger
c. When you see the charging screen, press down the button for 15 seconds. Keep the button pressed
down throughout the 5-second reset countdown.
d. The SLICE logo will be displayed when the factory reset is complete.
4. SLICE is now ready to pair with a new phone. Refer to Getting Started to activate and set up SLICE with the
new phone.
MAINTAINING YOUR MIO SLICE
BATTERY
Mio SLICE contains a rechargeable lithium polymer battery. Follow these instructions and guidelines to maintain
the battery lifespan.
If you do not follow these guidelines, the battery life could be shortened and there is a risk of damage to your
SLICE, risk of re, risk of electrolyte leaks and chemical burns, and risk of injury.
To Next Page
Loading...
