Mio SLICE User Guide 14
MIO SLICE SPECIFICATIONS
Maximum Readable Heart Rate: 220 BPM
Minimum Readable Heart Rate: 30 BPM
Operating Temperature: 5°C to 45°C (41°F to 113°F)
Case: PC
Caseback: PC + AL
Caseback Charging Pins: SUS 316
Material: TPU strap, anodized aluminum main body and buckle
Water Resistance: 3 ATM (30 meters or 100 feet)
Battery: 60 mAH Lithium Polymer
Magnets: Neodymium - Iron - Boron (NdFeB)
Radio Frequency/Protocol: 2.4GHz Bluetooth and ANT+
CERTIFICATION
FCC ID
Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.