Continuous Operation (over 30 minutes)
The shower has a built in timer to protect from accidental
unattended operation. This feature automatically switches
the shower off after 30 minutes of continuous use. The
shower may be restarted in the normal way by pressing the
start/stop button.
Hissing Sound
Note! High cold waters mains supply pressures may cause
a slight hissing sound to be heard from the shower whilst it
is operating. This is quite normal and does not indicate that
there is a fault with the shower.
Shower not Hot Enough
For safety the shower can be set to deliver four different
maximum temperatures.
In Standard mode. (1 beep when start/stop button pressed)
Set for either max 48°C, 45°C or 43°C (see standard mode
'Using your shower')
In BEAB mode (3 beeps when start/stop button pressed)
Set for max 41°C (see BEAB mode 'Using your shower')
If your shower is not hot enough please contact your installer
before calling Kohler Mira
Shower Flow Performance
Priority for the shower is to keep the showering temperature
constant.
User Fault Diagnosis
To Next Page
Loading...
Need help?
General
