Mircom FleX-Net FX-2003-12NDS User Manual

FleX-Net
TM
Installation and Operation Manual
21
Figure 7: Module Mounting Locations View # 2
FNC-2000 Fire Netw ork Controller Module
This module is required in the main lobby and one per node. It mounts over the main fire alarm board, preferably in
position 2. Use the four 2” spacers and four screws to secure the FNC-2000 to the main fire alarm board.
1
2
Main Chassis
FX-20XX-12NDS
Provision for PR-300 or
UDACT-300A
FNC-2000 in position 2
and other Adder Module
in position 1
MD-579
MD-575 Long Ribbon Cable
MD-579 Short Power Cable
MD-580 Long Power Cable

Mircom FleX-Net FX-2003-12NDS Specifications

General

Brand	Mircom
Model	FleX-Net FX-2003-12NDS
Category	Fire Alarms
Language	English