TAS-2000 NSL System User’s Guide
7
You have successfully added a new record to the system. The display now returns to the
programming menu.
To add another record,
1. Press to scroll one step up.
2. Press . This will bring you back into the Add New Record mode. Repeat steps 2 through 8.
Step 7: Enter Keyless Code
• If keyless codes are being used, enter the 4-digit
code. Press to save and continue.
• If keyless codes are not being used, press to
save and continue.
Step 8: Enter Ring Pattern
1. Select the ring pattern (01 to 04)
a
.
2. Press to save and continue.
a. 01: Standard North American ring
02: Distinct two long rings
03: Distinct quick ring, one long ring
04: Distint quick ring, one long ring, one quick ring
Enter Keyless Code
[ _ _ _ _ ]
Enter Ring Pattern
[ _ _ ]
0
To Next Page
Loading...
Need help?
General