TAS-2000 NSL System User’s Guide
13
Changing Your Password
To change your password, you must be in Programming Mode. Refer to Entering Programming
Mode on page 2 for instructions.
You have successfully changed your password. The display now returns to the programming menu.
Step 1: Select “Change Password”
1. Press (scroll up) or (scroll down) to find
“Change Password”.
2. Press when the arrow is beside “Change
Password”. The display enters Change Password
setup.
Step 2: Change your password
1. Enter your new password. It must consist of 10
digits. The factory default is “1111111111”.
2. Press to save and continue.
Door Timer
>Change Password
0
Change Password
[ 1 1 1 1 1 1 1 1 1 1 ]
To Next Page
Loading...
