Programming
10
Deleting Records
To delete a record, you must be in Programming Mode. Refer to Entering Programming Mode on
page 2 for instructions.
You have successfully deleted the record. The display now returns to the residents list.
•To delete another record repeat step 2.
•To exit Delete Record mode, press to return to the programming menu.
Step 1: Enter “Delete Record” mode
1. Press (scroll up) or (scroll down) to find
“Delete record”.
2. Press when the arrow is pointed beside “Delete
Record”. The display enters Delete Record mode.
Step 2: Select record
1. Press (scroll up) or (scroll down) to find the
record you want to delete. Note: Records are listed
according to resident dial code.
2. Press to delete the record.
Edit Record
>Delete Record
0
1000>
1001
9
To Next Page
Loading...
Need help?
General