1
3 4
2
Press and Hold
Press and hold the Read button for 4 sec-
onds until a solid green light flashes once.
Within 1-minute, a second light will flash to
confirm the transmission.
Manual Read via the Instadose® App
Select ‘Badge reader’
Switch on ‘Looking for badges’
Response
When the message that the badge has
been read is showing the transfer of data
is complete.
Verify Transfer
Press the read history button to verify that
the data has been transferred.
To perform a manual read via the mobile app, follow
the instructions below. You can verify that the dose
was recorded by logging into the Instadose® App or
your Amp+ online account.
Instadose® App
The Instadose® app allows you to transmit/read dose
data from the dosimeter and view both current and
historical dose results.
Download the Instadose® App
Download the mobile application from either the
iTunes App Store or Google Play.
To Next Page
Loading...
