EasyManua.ls Logo

Miroir MP60 - Troubleshooting and Specifications; Troubleshooting Common Issues; Technical Specifications

Miroir MP60
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 14
troUblesHootInG
The Projector will not show the video on the wall.Q.
Recharge your devices battery. Also, check to see if the HDMI cable is fully A.
inserted into the Projector and your device.
The video showing on my wall is blurry.Q.
Adjust the Focus Wheel on the Projector to ne-tune the picture. It may also A.
depend on the surface on which you are attempting to show your video. Try
moving to a location with a smoother wall surface.
No signal - I am getting no input from my device.Q.
Make sure your device is on - and fully charged.A.
The projector is connected to my device but is not projecting.Q.
A.
Turn the projector off and then back on. Wait a few seconds for your device
and the projector to sync. If the product is still not projecting, please
reference the included compatibility guide to ensure your device and the
content you are attempting to project is compatible with the projector.
sPecIfIcatIons
natIve resolUtIon 854 - 480 (WVGA)
leD laMP 85 Lumens
leD laMP lIfe Approximately 20,000 Hours
sPeaker 2 - 1W Speakers
PoWer 3800mAh Rechargeable Battery
batterY lIfe 1.5-2 Hours (Fully Charged)
screen asPect ratIo 16:9
BC

Related product manuals