MITECH MH320 - 2 Structure Feature & Testing Principle; 2.1 Structure Feature; 2.1.1 The Hardness Tester Appearance; 2.1.2 Parts of the Main body

4
mvip@mitech-ndt.com
1.3 Configuration
Table 1-1
No.
Item
Quantity
Remarks
Standard
Configuration
1
Main Unit
1
2
D type impact device
1
With cable
3
Standard test block
1
4
Cleaning brush (I)
1
5
Small support ring
1
6
Battery Charger
1
9V 500mA
7
Paper for printing
1
8
Manual
1
9
Instrument case
1
Optional
Configuration
11
Cleaning brush (II)
1
For use with G type
impact device
12
Other type of impact
devices and support rings
Refer to Table 3 and
Table 4 in the
appendix.
13
Data-Pro software
1
14
Communication cable
1
15
16
1.4 Working Conditions

Working temperature： -10℃～＋50℃;

Storage temperature：-30℃～＋60℃;

Relative humidity: ≤90％;

The surrounding environment should avoid of vibration, strong magnetic field, corrosive medium
and heavy dust.
1.5 Safety Instructions

The instrument can only work with the specially designed battery pack and power adapter (charger)
supplied by Mitech Co. LTD. Working with others may result in damage of the instrument, battery
leakage, fire or even explosion.
 Do not cast the battery pack into fire and do not short circuit, disassemble or heat the battery pack,
otherwise battery leakage, fire or even explosion may occur.

Do not open the cover of the paper compartment or come into contact with the heating head of the
printer by hand or any part of your body to avoid burns due to high temperature when the printer is
printing.
sale@ponpe.com
ponpe.com