Why can't I change the time and date on my Mitel IP Phone display?
- AAndrea SmithJul 26, 2025
The time and date on your Mitel IP Phone are programmed by your system administrator. If the date and time are incorrect, please contact them.
Why can't I change the time and date on my Mitel IP Phone display?
The time and date on your Mitel IP Phone are programmed by your system administrator. If the date and time are incorrect, please contact them.
Why can't I program System Speed-Dial numbers on my Mitel 5224?
System Speed Dial numbers on your Mitel IP Phone are programmed by your system administrator.
What to do if I am experiencing audio problems on my Mitel 5224?
If you are experiencing audio issues such as echo, distortion, or choppiness on your Mitel IP Phone, contact your system administrator for assistance.
Why can't I use Agent Help or Record-a-Call features on my Mitel 5224?
If your system uses Peer-to-Peer (P2P) audio, you cannot use Agent Help or Record-a-Call features when you are on a P2P call. Contact your system administrator for more information.
What to do if my Mitel 5224 endpoint is not working properly?
Contact your system administrator.
What to do if I cannot use features described in the guide for my Mitel 5224?
The feature may not be enabled. Contact your system administrator for more information.
Speakerphone | Yes |
---|---|
Network Ports | 2 x 10/100 Mbps |
Power | PoE (802.3af) or AC adapter |
Audio | G.711, G.729a |
Fixed Feature Keys | Hold, Transfer, Conference, Mute, Volume, Message |
Headset Port | Yes |
Supported Protocols | MiNet |
Mounting | Desk or Wall |
Programmable Keys | 24 programmable keys |
Details setup and operation for Mitel 5340 IP phones, covering features.
Covers setup and operation for Mitel 5020, 5220, and 5224 IP phones.
Details setup and operation for Mitel 5212 IP phones, featuring fewer keys.
Explains setup and operation for Telematrix 3000 phones, lacking an LCD display.
Instructions for connecting and configuring headsets with IP phones.
Configures language for web interface and phone display, and discusses voice mail language.
Steps and requirements for logging into the web administration interface.
Instructions for requesting a new PIN via email if the existing PIN is forgotten.
Steps to change the existing PIN for web and phone access.
Instructions for logging out of the web interface.
Guide for initial phone service setup, including recording name and setting call coverage.