38 Using the phone system
Final
2 Use the Scroll Up and Scroll Down keys on a 5020/5220 IP phone or
use the keys on a 5224 IP phone to navigate the list .
3 Press the TIME softkey if you wish to display time and date of the call.
4 Press the NUMBER softkey if you wish to display the number of the caller.
5 Press the NAME softkey if you wish to display the name of the caller
again. If the name is not known, this option is not available.
6 Press the QUIT softkey to exit from the call list.
Call a number from your incoming call list
To call a number from your incoming calls list, follow these steps (only
available if dialing from the incoming call list is supported by your Service
Provider):
1 Press the CALLS softkey on your phone.
The most recent call that you received is displayed.
2 Use the Scroll Up and Scroll Down keys on a 5020/5220 IP phone or
use the keys on a 5224 IP phone to navigate the list.
3 Press the DIAL softkey to make a call to the displayed number.
The next available Line Appearance is selected and the system will
attempt to dial the displayed number by prefixing it with the appropriate
digits for external dialing (usually "9" or "91" depending on configuration).
If the number can be dialed as such, you will hear ringing once the call
has been placed. If the number cannot be dialed as such, the call will fail
and you will have to dial the number manually, including the proper prefix
digits
The position of the call in the call list is displayed in front of the phone
number.
The * symbol beside the position of the call means that the call was not
answered.
*CALLS means that there has been at least one unanswered call since
the last time you viewed the list of calls you received.
Redialing
Using Redial you can view a list of calls that were made and also redial a
number in that list without using the keypad. The maximum amount of
1: John Doe
DIAL TIME QUIT
To Next Page
Loading...
