EasyManua.ls Logo

Mitel 5224 - Page 51

Mitel 5224
137 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46 Using the phone system
Final
3 Enter your PIN.
4 Press the # key or the ENTER softkey once you have finished entering
your PIN.
The system verifies that the PIN is valid and then it logs you into the
phone.
If you log in while you are logged in to another phone, the system will log
you out of the original phone.
You cannot log in or out, or activate a phone, while the phone is on an
active call.
If you are not logged into a phone, all calls to your extension go directly to
call coverage.
If you have not been assigned the privileges required to log out of your
phone, you are not prompted for a PIN when you log in.
You are not prompted for a PIN when you log in to a phone with a location
extension.
Logout
To log out of a phone, follow these steps when your phone has no calls
connected. At the start, the display should display the following:
1 Press the MENU softkey.
.
2 Press the LOGOUT softkey
The LCD displays a confirmation message.
3 Press the YES softkey to proceed. The LCD will display the message
“Logout successful”, confirming that you are logged out of the phone and
the system. Incoming calls will be forwarded to Call Coverage. The
display will return to a logged out/unassigned idle state
.
PIN: *****
ENTER QUIT
Extension: 314
REDIAL CALLS MENU
Extension: 314
REDIAL CALLS MENU
MENU
LOGOUT DIR QUIT
Confirm Logout
YES NO
Logout Successful
Logged Out
ACTIVATE

Table of Contents

Other manuals for Mitel 5224

Related product manuals