© Copyright 2023, Mitel Networks Corporation. All Rights Reserved. 58016876 REV00
The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks Corporation (MNC) or its subsidiaries (collectively "Mitel") or others.
Use of the Trademarks is prohibited without the express consent from Mitel. Please contact our legal department at legal@mitel.com for additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please refer to the website:
http://www.mitel.com/trademarks.
Mitel’s Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S. patents (and any foreign patent counterparts thereto) identified at Mitel’s website: www.mitel.com/patents. For more information on the PD patents that are licensed,
please refer to www.cmspatents.com.
QUICK REFERENCE GUIDE
Mitel 6915 SIP Phone - Quick Reference Guide
Getting started
Contacts
Call History
Displays a list
of missed,
outgoing and
Voicemail
Settings
Provides
services and
options that
allow you to
customize
your phone.
Volume
Speaker/Headset
Toggles the phone’s audio between speaker
and headset. If you are using a DHSG/EHS
headset, ensure that the headset jack adapter is
removed from the headset port. See the Mitel
6915 SIP Phone Installation Guide for more details.
Warning!
The headset port is for headset use only.
Plugging any other devices into this port
may cause damage to the phone and will
void your warranty.
Mute
Navigation/Select
Multi-directional navigation
keys are used to navigate
through the phone menu.
Press the center button
the left and right navigation
keys can be used to switch
Top SoftKeys
6 programmable keys that support
Bottom Softkeys
4 context-sensitive softkeys.
Redial
received calls.
Hold
Goodbye
Mutes/unmutes
Displays Call
Places an active
call on hold or
Adjusts the
volume for
the ringer,
handset,
speaker,
and headset.
Provides
On the Home screen,
service.
your voicemail
access to
History with a list
of outgoing calls.
all outgoing audio
from headset,
handset or
speaker.
Displays
a list of your
contacts.
resumes a call
from hold.
to select menu options and
perform various actions.
that support up to 9 functions.
between the home screen,
the line manager, and active calls.
Ends the active
call and used
for exiting menus.
up to 10 functions
Basic call handling
Making a call
1. Lift the handset or press the key, and
at the dial tone, enter the number.
2. Press the Line / Call appearance button and
at the dial tone, enter the number.
Ending or ignoring a call
Place the handset back in its cradle, press the Ignore softkey, or press the key.
Answering a call
Lift the handset, press the Answer softkey or press the key for handsfree
operation.
Redialing
Press the Redial softkey once or the key twice to call the last dialed number
or
Press the key once to access the Call History application that displays a list of
recently dialed numbers. Use the up and down navigation keys to scroll through the
entries and select a number. Press either the Select button or Dial softkey to redial the
selected number.
Muting or unmuting a call
Press the key while on an active call to mute the microphone for your handset,
headset, or speaker. Press the key again to unmute the audio.
Holding and resuming a call
1. To place an active call on hold, press the key. A (hold) icon flashes on the
respective Line key.
2. To resume the call, press the key again or press the respective Line key.
To Next Page
Need help?
General
