Operation and Maintenance
Event message Trigger condition
Details
63
Severity
The licence limit for
Mitel Dialer has been
reached
Mitel Dialer could not be linked to a
user because too few licences are
available.
Total purchased
licences, date,
time
Serious (negative,
with match)
The licence limit for
Mitel SIP terminals has
been reached
A Mitel SIP terminal is unable
to register or use the video
functionality because there are
too few Mitel SIP Terminals or
Mitel 8000i Video Options licences
available.
Parameter 1=1:
Missing Mitel
SIP Terminals
licence, Parameter
2=1: Missing
Mitel 8000i Video
Options licence,
Parameter 3=3:
Max. number of
licences, date,
time
Serious (negative,
with match)
The licence limit for
SIMPLE/MSRP has
been reached
A third-party application wishes
to use the MSRP and/or SIMPLE
protocol for a user, but not enough
licences are available.
Date, time Serious (negative,
with match)
The licence limit for
standard SIP terminals
has been reached
A standard SIP terminal is unable
to register or use the video
functionality because there are
too few SIP Terminals or Video
Terminals licences available.
Parameter 1=1:
Missing SIP
Terminals licence,
Parameter 2=1:
Missing Video
Terminals licence,
Parameter 3=3:
Max. number of
licences, date,
time
Serious (negative,
with match)
TLS certificate expires
soon
A TLS certificate for a SIP node
or SIP endpoint is about to expire
(Serious severity level) or has just
expired (Critical severity level)
and needs to be renewed.If the
endpoint type is = 0 (Mitel), then
is parameter 2 = node ID.If the
endpoint type is = 1 (3rd party),
then the remaining parameter data
contains the first eleven characters
of the certificate name.
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
Serious / Critical
(without match)
63
The node is also always indicated in an AIN.
Release 7.1
System Manual for Mitel SMB Controller 248
To Next Page
Loading...
Need help?
General
