Operation and Maintenance
Event message Trigger condition
Details
63
Severity
TLS certificate update
failed
The update of the TLS certificate
for an SIP node or SIP endpoint
via FTP has failed and needs
to be renewed manually.If the
endpoint type is = 0 (Mitel), then
is parameter 2 = node ID.If the
endpoint type is = 1 (3rd party),
then the remaining parameter data
contains the first eleven characters
of the certificate name.
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
critical (negative,
with match)
TLS certificate update
successful
A TLS certificate for a SIP node
or SIP endpoint was successfully
renewed.If the endpoint type is =
0 (Mitel), then is parameter 2 =
node ID.If the endpoint type is =
1 (3rd party), then the remaining
parameter data contains the first
eleven characters of the certificate
name.
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
critical (positive,
with match)
TLS certificate was
generated: Upgrade
non-Mitel endpoints
now
A TLS certificate has been
generated. If generation is manual,
the certificate must be imported
manually into the Mitel SIP nodes.
The certificate must always be
imported manually on all non-Mitel
nodes and non-Mitel endpoints.
Date, time Normal (without
match)
TLS server certificate:
Validation failed
While a TLS connection is
established the validation of the
certificate of the TLS server failed.
Service, TCP port,
reason, date, time
critical (negative,
with match)
TLS server certificate:
Validation successful
The validation of the certificate of
the TLS server was successful.
Service, TCP port,
date, time
critical (positive,
with match)
Too few FoIP channels Setting up a fax connection via
T.38 failed because no FoIP
channel is available.
Available FoIP
channels on node
Serious (without
match)
63
The node is also always indicated in an AIN.
Release 7.1
249 System Manual for Mitel SMB Controller
To Next Page
Loading...
Need help?
General
