ACCESSING YOUR MAILBOX VIA THE BUTTON
When you have new messages, your button will be flashing
When this happens, lift handset
Press the button
Enter your password then press #
*Note: This only works when the button is flashing
USING THE BUTTON TO LEAVE A MESSAGE FOR ANOTHER EXT
When calling an internal extension that is busy or in DND –
Press the button
WAIT on the line until you hear their greeting
Leave message at the tone
(If you do not wait on the line, you will be setting a callback as described above)
ACCESSING VMAIL FROM ANOTHER EXT OR IF IS NOT FLASHING
Press the Voicemail button
When the system answers, press the * key
Enter your mailbox number (your extension number)
Enter your password when prompted, then press the # key
Follow Voicemail Menus to navigate through voicemail, or listen to the system
voice prompts
FROM OUTSIDE THE OFFICE
Call your main number OR backdoor to voicemail OR your direct line
When the voicemail answers, press the * key
Enter your mailbox number (your extension number)
Enter your password when prompted, then press the # key
Follow Voicemail prompts to navigate through voicemail
To Next Page
Loading...
