Mitel 8568 - Troubleshooting; Error Messages

Call Features
Page 52 Mitel
®
8568 Telephone User Guide – Issue 3, February 2011
Changing the DND Settings
See “Using Do-Not-Disturb (DND)” on page 57 for more information about using DND.
To turn on DND using Remote Programming:
1. Do one of the following:
 Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
 Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #. See page 47 for details on setting up a station
passcode for your extension.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To turn off DND using Remote Programming:
Follow steps 1. through 4. above, and then dial 371.
Changing the Manual Call Forwarding Settings
See “Manual Call Forwarding” on page 35 for more information about Manual Call Forwarding.
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
 Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
 Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #. See page 47 for details on setting up a station
passcode for your extension.
5. Dial one of the following Call Forwarding feature codes:
 355 (All)
 356 (No answer)
 357 (Busy)
 358 (No Answer/Busy)
6. Enter either an extension number or 8 followed by a phone number.
To turn off Call Forwarding using Remote Programming:
Dial 355, and then hang up.