M Mitel (design) is a registered trademark of Mitel Networks Corporation. © 2014, Mitel Networks Corporation.
All other products and services are the trademarks of their respective holders. All rights reserved.
2900-001
UC360 COLLABORATION POINT - QUICK REFERENCE GUIDE for Clearspan
Adding Calls to a Conference
An incoming call appears on a conference avatar.
• Tap to answer the call. You can talk with the caller.
The first call is automatically added to the conference.
When the second call arrives:
•Tap to talk with the caller, and tap to add the caller to the conference. You can
tap to ignore the call.
Making a Call
• Tap and enter a number, then press
• OR Tap to open contacts and select a contact to call.
Hold
• Tap Hold for the individual participant.
• Tap again to retrieve the call or press the flashing red ring around the conference avatar.
To put the entire conference on hold, place each party on hold.
Muting a Conference Call
• Press Mute .
You will see a red light displayed above the mute button while muted.
• Press again to unmute.
To Next Page
Need help?
General
