Mitel Superset 4025 User Manual

-14-
Call Forward
Call Forward lets you redirect incoming calls to an alternate number.
"External Calls?" redirects your incoming external calls only; "Internal Calls?"
redirects your incoming internal calls only. If you want to redirect both
external and internal calls, you must program each separately.
"Always Forward?" redirects all incoming calls regardless of the state of your
telephone. "When No Answer?" redirects calls after several rings if you don't
answer. "When Set's Busy?" redirects calls when your telephone is busy.
"Busy/No Answer?" redirects calls when your telephone is busy or when you
don't answer.
Note: For information about "I'm Here?", see Call Forward - I'm Here.
To program Call Forward:
1. Press SUPERKEY.
2. Press the No softkey until "Call Forwarding?" appears.
3. Press the Yes softkey.
4. Do one of the following:
" To program external forwarding, press the Change softkey.
" To program internal forwarding, press the No softkey and the
Change softkey.
5. Press the Program softkey.
6. Press the No softkey until the type of Call Forward appears.
7. Press the Yes softkey.
8. Dial the destination number.
9. Press the Save softkey.

Mitel Superset 4025 Specifications

General

Speakerphone	Yes
Headset Jack	Yes
Line Keys	2
Type	Digital
Compatibility	Mitel communications systems
Display	2-line, 24-character LCD