Mitel Superset 4025 User Manual

-39-
Record a Call
This feature uses your voice mail system to record your telephone
conversations.
Note: You may be required by law to inform the other party that you are
recording the conversation. For specific instructions, consult your system
administrator.
To start recording while on a 2-party call:
! Press the Record Call key. (See Feature Keys elsewhere in this guide for
instructions on programming a Record Call key to your phone.)
Note: Your system may be programmed to automatically begin recording
external calls when you or the other answers.
To pause recording:
! Press the Pause softkey.
To resume recording after pausing:
! Press the Resume softkey.
To stop a recording without saving it:
!
Press the Erase softkey or the CANCEL key.
To stop and save a recording:
! Press the Save softkey.
Putting the call on hold saves the recording; taking the call off hold starts a
new recording. Depending on system programming, hanging up, or pressing
TRANS/CONF or a DSS key, may also save the recording.
To listen to a recording:
1. Lift the handset.
2. Access your voice mailbox.
3. Follow the prompts to retrieve the recording.

Mitel Superset 4025 Specifications

General

Speakerphone	Yes
Headset Jack	Yes
Line Keys	2
Type	Digital
Compatibility	Mitel communications systems
Display	2-line, 24-character LCD