Mitel T7100 - Tag Call

-15-
Tag Call
Tag Call allows you to "tag" any threatening call that you receive. Using this
tag, your system administrator can identify the source of the malicious call
and provide this information to appropriate personel or authorities. You can
only tag calls during an active two-party call.
Note: Tagging a call unecessarily may result in fines or other penalties.
To tag a malicious call:
1. Press TRANS/CONF.
2. Dial *55.
If the call was successfully tagged "Thank You" is shown on the display;
otherwise, "Not Allowed" is displayed.