Mitel TA7102 - Page 38

TA7102 Hardware Installation
38
153/1531-ANF 901 14 B 2017-03-08
Table 10: RJ-45 Pinout Information
Pin #
Function
Colour Coding
EIA/TIA 568A
EIA/TIA 568B AT&T 258A
1
Transmit +
White with green stripe
White with orange stripe
2
Transmit -
Green with white stripe or solid
green
Orange with white stripe or solid
orange
3
Receive +
White with orange stripe
White with green stripe
4
N/A
Blue with white stripe or solid blue
Blue with white stripe or solid blue
5
N/A
White with blue stripe
White with blue stripe
6
Receive -
Orange with white stripe or solid
orange
Green with white stripe or solid
green
7
N/A
White with brown stripe or solid
brown
White with brown stripe or solid
brown
8
N/A
Brown with white stripe or solid
brown
Brown with white stripe or solid
brown
The RJ-45 cable uses two pairs of wires: one pair for transmission and the second pair for reception. It is
wired so that pins 1 & 2 are on one twisted pair and pins 3 & 6 are on a second pair according to common
wiring standards which meet the EIA/TIA T568A and T568B requirements.
Figure 7: Straight Through Connectivity
Pin 1 Pin 1
Pin 2 Pin 2
Pin 3 Pin 3
Pin 6 Pin 6
Pin Name and Function
The following is the function of each pin in a RJ-45 cable.