Step 3: Using the provided two-panel power cable, plug one end into the 750+
panel and the other into the 1500+. The power cord with outlet plug will plug into
the remaining port on the 1500+ and will plug into wall power.
MITOPRO+ FLOOR STAND INSTRUCTIONS
TWO PANELS CONTINUED
These brackets can also be used to hang a
MitoPRO 750+ & MitoPRO 1500+ from a door. In a
door hang or vertical stand install the MitoPRO
1500+ should be on TOP."
www.mitoredlight.com 17
Some helpful assembly videos are
available here: https://mitoredlight.
com/pages/user-manual
To Next Page
Loading...