14
• During the first ten hours of work, avoid running the engine at maximum speed for a prolonged
period until all the components have bedded in, after the engine has been run-in, it will reach its
maximum power.
MAINTENANCE
IMPORTANT
• After every use, check that all nuts, bolts and screws are securely fastened and tighten if
necessary.
FUEL FILTER
• Every 15 hours of operation, using a wire hook, take the fuel filter from the fuel tank Fig19 and clean or
replace with a new fuel filter.
SPARK PLUG
• Poor starting or misfiring is often caused by a fouled or defective spark plug, clean and reset the
gap to 0.65 mm, or replace the spark plug with NGK: BPRM7A as necessary Fig 20.
AIR FILTER
• Before using the brush cutter, check the air filter Fig 22. Being clogged, will reduce the engine
performance.
• Remove the air filter cover by undoing the cover screw Fig 21, clean the filter element in warm, soapy
water, dry completely before installing. If the element is broken or shrunk, replace with a new one.
FIG 21 AIR FILTER COVER SCREW
Fig 22 AIR FILTER
Fig 19
fuel filter
Fig 20
To Next Page
Loading...
