Mitsubishi Electric C80 Series User Manual

C80 Series Instruction Manual
9 Machining a Workpiece
331
IB-1501453-C
9.4 Collation and Stop
The machining program operation can be block stopped at a registered collation and stop position. The registered collation
and stop position can be canceled.
When the specified block appears, NC status will change single block stop after the execution of the block.
The device [Memory card] and [USB Memory] are not selectable with this function.
When collation and stop is registered
When collation and stop position is displayed
Monitr
Col stp

Mitsubishi Electric C80 Series Specifications

General

Brand	Mitsubishi Electric
Model	C80 Series
Category	Control Systems
Language	English